1 publication order number : MCH3486/d www.onsemi.com ? semiconductor component s industries, llc, 2014 october 2014 - rev. 1 ordering information see detailed ordering and shipping info rmation on page 5 of this data sheet. MCH3486 features ? low r ds (on) ? 4v drive ? esd diode-protected gate ? pb-free, halogen free and rohs compliance ? small surface mount package (mcph3) specifications absolute maximum ratings at ta = 25 c parameter symbol value unit drain to source voltage v dss 60 v gate to source voltage v gss 20 v drain current (dc) i d 2a drain current (pulse) pw 10 s, duty cycle 1% i dp 8a power dissipation when mounted on ceramic substrate (900mm 2 0.8mm) p d 1 w junction temperature tj 150 c storage temperature tstg ? 55 to +150 c thermal resistance ratings parameter symbol value unit junction to ambient r ja 125 c/w when mounted on ceramic substrate (900mm 2 0.8mm) power mosfet 60v, 137m ? , 2a, single n-channel v dss r ds (on) max i d max 60v 137 m @10v 2a 192 m @4.5v 217 m @4v electrical connection n-channel v dss r ds (on) max i d max 60v 137 m @10v 2a 192 m @4.5v 217 m @4v packing type:tl marking 1 2 3 1:gate 2:source 3:drain stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should n ot be assumed, damage may occur and reliability may be affected. tl ft lot no. lot no.
MCH3486 www.onsemi.com 2 electrical characteristics at ta = 25 c parameter symbol conditions value unit min typ max drain to source breakdown voltage v( br ) dss i d =1ma, v gs =0v 60 v zero-gate voltage drain current i dss v ds =60v, v gs =0v 1 a gate to source leakage current i gss v gs =16v, v ds =0v 10 a gate threshold voltage v gs (th) v ds =10v, i d =1ma 1.2 2.6 v forward transconductance g fs v ds =10v, i d =1a 1.8 s static drain to source on-state resistance r ds (on)1 i d =1a, v gs =10v 105 137 m r ds (on)2 i d =0.5a, v gs =4.5v 137 192 m r ds (on)3 i d =0.5a, v gs =4v 155 217 m input capacitance ciss v ds =20v, f=1mhz 310 pf output capacitance coss 40 pf reverse transfer capacitance crss 25 pf turn-on delay time t d (on) see specified test circuit 6 ns rise time t r 5 ns turn-off delay time t d (off) 28 ns fall time t f 11 ns total gate charge qg v ds =30v, v gs =10v, i d =2a 7 nc gate to source charge qgs 1 nc gate to drain ?miller? charge qgd 1.3 nc forward diode voltage v sd i s =2a, v gs =0v 0.83 1.2 v switching time test circuit product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product per formance may not be indicated by the electrical characteristics if operated under different conditions. pw=10 s d.c. 1% p. g 50 g s d i d =1a r l =30 v dd = 3 0v v ou t MCH3486 v in 10v 0v v in
MCH3486 www.onsemi.com 3
MCH3486 www.onsemi.com 4
MCH3486 www.onsemi.com 5 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc) or its subsidiaries in the united st ates and/or other countries. scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a lis ting of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . scillc reserves the right to make changes with out further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any parti cular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specific ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated fo r each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc pro ducts are not designed, intended, or authorized for use as com ponents in systems int ended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees ar ising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that sci llc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject t oall applicable copyright laws and is not for resale in any manner. 0.65 0.65 0.4 2.1 0.6 package dimensions MCH3486-tl-h/ MCH3486-tl-w mcph3 case 419aq issue o unit : mm 1 : gate 2 : source 3 : drain recommended soldering footprint ordering & package information device package shipping note MCH3486-tl-h mcph3 sc-70,sot-323 3,000 pcs. / reel pb-free and halogen free MCH3486-tl-w note on usage : since the MCH3486 is a mosfet product, pl ease avoid using this device in the vicinity of highly charged objects.
|
